In this review we will make a device with a center finder for a manual milling cutter. It will come in handy when you need to make grooves in wooden blocks.
For the manufacture of this device you will need plexiglass and wooden slats.
First of all, cut a piece of plexiglass to size. Then we saw off four wooden slats and glue them along the contour.
On the reverse side, the author additionally fastens the rails on the screws.
The main stages of work
In the center of the plexiglass with the help of a manual milling cutter, it will be necessary to make a groove.
Next, we make four parts from which we will assemble the center finder itself. By the way, plywood can be used together with wooden battens.
We connect the prepared parts to each other. And then we fasten the center finder to the previously manufactured frame with plexiglass.
At the next stage, we fasten another piece of plexiglass to the Plexiglas. It will also need to make a groove in the center.
Then apply the markup, which acts as a guide. Our homemade product is completely ready - you can try it in work.
For details on how to make this useful device for hand milling with your own hands, we recommend that you look in the video on our website.
If you have any thoughts or comments on how to refine this device, write about it in the comments below the video.
