A homemade gun for applying plaster on the walls will be an indispensable assistant in the performance of repair or construction work. It is easy to use, perfectly copes with the tasks assigned to it and is not picky in maintenance.
This gun has sufficient power to quickly spray the contents (in this case, liquid plaster and water) over the entire area of the wall. The design itself is very practical and will last a long time. If necessary, the plastic canister can be replaced.
To make this gun, you need to get a plastic eggplant and a device for spraying liquid. After pulling the trigger, the contents will be sprayed: water or cement-sand mortar.
The main stages of work
In the tank itself, the bottom is cut out so that the plaster can be poured there. At the top of the eggplant a metal tube is inserted, at the ends of which a thread must be cut. Then you need to connect the gun to this tube.
At this stage, it all ends and the gun is ready for use. In fact, there is nothing complicated in its manufacture, and it consists of three main parts: a plastic canister, a tube and the gun itself. This device will cost very cheaply, but will be indispensable in construction matters.
This homemade product will save a lot of time and help to avoid expensive purchases. The design is quite simple, so such a gun for applying plaster will always be in demand! See the video for a detailed manufacturing process.
