For this useful homemade product you will need a kitchen bowl or any other hemispherical container (it is advisable to use stainless steel cookware). In this case, a metal dish lid is used. And the first thing on it is to cut the handle. Then you can proceed to the main stages of work.
Step-by-step BBQ process
As a vertical barbecue rack, a table leg made of metal is suitable. If there is nothing suitable at hand, then you can take a piece of a round or profile pipe and weld a nut inside - then to fasten the lid from the dish, you need only one bolt. For greater reliability, you can weld a plate to the pipe and then screw the container.
If we take the wing nuts, then in this case the design will turn out to be collapsible. It is convenient to transport barbecue in a backpack or car trunk when hiking in the woods or going on a vacation outside the city, hunting or fishing. The length of the vertical stand can be done by anyone - at your discretion. The bottom of the leg must be cut off at an angle so that you can easily pierce the ground.
Next, you need to make slots on the sides to install the grill and additional accessories - for example, skewers. In the end, it turned out a very useful tool for cooking on a camping trip. Please note that for greater reliability, the vertical barbecue rack should be deepened into the ground by about 15-20 cm.
