In this review, the author tells and shows how to make a concrete walkway carved into decorative stone with your own hands.
Such a path will be to the place both on the territory of a private house, as well as on a summer cottage. And to make it very simple.
First of all, we prepare the foundation: we go deeper to the required depth and make the formwork on the sides (you can just lay the stones).
If necessary, we add crushed stone, reinforce and lay the solution.
"Cutting" stones on fresh concrete is not very convenient. It is better to wait a few hours until the solution sets a little.
Read also on our website: imitation pavers on concrete using a stamp and how to make an imitation of stone on a concrete wall.
The main stages of work
At the next stage of work, after the mortar has set a little bit, you can start “cutting” decorative stone. For this, a homemade tool is used.
The shape and size of the stones are cut arbitrarily - as you like, do it.
Fiber can be added to the solution - it will not be worse. After the solution has dried, the surface of the track should preferably be treated with a special deep penetration varnish to protect it from water.
Details on how to make a concrete path carved into decorative stone, see the video.
