Old freon cylinders can be used not only for the manufacture of street barbecue or sandblasting machines. Other useful things will come out of them. For example, a portable cabinet for storing various small things in a workshop or garage.
The home-made cabinet has several independent compartments in which you can store bolts with nuts, nails, self-tapping screws and other fasteners.
First of all, the master makes the marking with a marker, after which he cuts the balloon into two parts using a grinder. The edges of the cut must be treated with a file or a petal circle so that there are no burrs.
The process of manufacturing a portable locker for a garage and workshop
On the edges of one of the halves of the container, it is necessary to weld pieces of steel strip. Then the two halves are connected together - and for this, the master uses two homemade metal loops that are attached by welding.
At the next stage, the master welds three legs to the bottom of the cabinet, which he cut off from a piece of steel pipe. For greater stability on the legs, it is additionally necessary to weld washers of a suitable diameter.
Further, the master makes round shelves from sheet metal and pieces of strip, in which fasteners or other small things will be stored. Inside each cell, he welds two jumpers - as a result, four independent compartments are obtained.
At the last stage of the work, the master starts assembling and painting the homemade product. Details on how to make a portable cabinet for storing various small things from a cylinder with your own hands can be found in the video on the website.
