There is not always free space on the desktop to install a machine - for example, the same grinder. Therefore, in this review, the author proposes to make a compact grinder with the possibility of fixing it on the wall.
Plywood is used to make the base of the machine, and some other materials will also be required, including plastic pipe cuts and bicycle sleeves.
First of all, it is necessary to press the bushing from the front wheel of the bicycle into the coupling for plastic sewer pipes.
And inside the hub from the rear wheel, the author hammers a piece of a round piece of wood with a hole drilled in the center.
The main stages of work
In the next step, it will be necessary to remove (knock down with a hammer) the side rings on the rear hub. The resulting "keg" is pressed into the plastic pipe, and then into the connector.
From plywood, the author makes the base of a grinding machine (grinder). Then you need an engine. A motor from a food processor is used as a drive.
We install the engine with the drive roller inside the housing. Then, in the upper part of the structure, mounts for the second roller must be installed.
Next, we connect and install the on / off button on the case. We stretch the sanding belt, and then you can test the homemade machine in operation.
For details on how to make a compact mini grinder for the garage and workshop from improvised materials, we recommend that you watch in the video on our website.
